IPP DELTAFLEX® Flanges,  Type BUPP- DIPS
redlineback.jpg (2460 bytes)
Back-up Ring in Ductile Iron Pipe Sizes (DIPS)
buppx1red.jpg (11552 bytes) buppf1red.jpg (12094 bytes)
redball.jpg (3378 bytes) Description   Utilizes the patented IPP Deltaflex® flange cross section
redball.jpg (3378 bytes) Utilization Backing flange to suit ductile iron pipe sized HDPE piping systems
redball.jpg (3378 bytes) Material Cast in ductile iron A536 (65/45/12) tensile 65,000 psi; yield 45,000 psi; 12% elongation
redball.jpg (3378 bytes) Dimensions Bolt circle is ANSI/B16.5 Class 150. Mates with ANSI B16.5, B16.1, AWWA C207, Table 2 Class D
redball.jpg (3378 bytes) Finish Blue primer, hot dipped galvanized, epoxy coated
  
DIMENSIONAL TABLE, and OPERATING PRESSURE

SIZE

IPP Product Code

HDPE 1 Operating Pressure Outside Dia.
O.D.		 Flange Thick.
T		 Inside Dia.
I.D.		 Y Bolt Count
N		 Bolt Hole
B.D.		 Bolt Circle
B.C.		 Radius
R		 Weight (lbs/pc)
04" DIPS-FM-0400 275 9.00 0.94 4.90 0.27 8 0.75 7.50 .44 5.1
06" DIPS-FM-0600 275 11.00 1.00 7.00 0.28 8 0.88 9.50 .50 7.0
08" DIPS-FM-0800 275 13.50 1.12 9.13 0.30 8 0.88 11.75 .50 10.5
10" DIPS-FM-1000 275 16.00 1.19 11.25 0.60 12 1.00 14.25 .50 15.3
12" DIPS-FM-1200 275 19.00 1.50 13.37 0.63 12 1.00 17.00 .50 24.4
14" DIPS-FM-1400 275 21.00 1.63 15.48 0.70 12 1.13 18.75 .50 36.1
16" DIPS-FM-1600 275 23.50 1.88 17.59 0.70 16 1.13

21.25

.50 48.3
18" DIPS-FM-1800 200 25.00 1.75 19.70 0.88 16 1.25 22.75 .50 47.9
20" DIPS-FM-2000 200 27.50 2.06 21.85 0.48 20 1.25

25.00

.50 60.7
24" DIPS-FM-2400 200 32.00 2.13 26.05 0.60 20 1.38 29.50 .50 90.4
1. Operating pressure on an HDPE stub-end with a
    safety factor of 2.		 Please contact IPP for the distributor closest to you.
Discounts Available on Request

BACK TO CATALOG

logowhitesmall1.jpg (7700 bytes)
1900 POWELL ST, SUITE 220, EMERYVILLE, CA 94608
PHONE: (510) 923-1949   SALES FAX: (510) 923-1673 TOLL FREE: 1-800 969-0962
Email: info@ipp-inc.com Website: www.ipp-inc.com