IPP Ductile Iron

Standard Products

LJ-DI —ANSI B16.5, Class 150, Lap Joint Flange in Ductile Iron

lj2.jpg (15218 bytes)

lj1.jpg (11099 bytes)

		Description		An ANSI B16.5 Class 150 lap joint cross section
		Utilization		A high pressure back-up ring for HDPE flange adaptors and type A, B, C steel stub-ends
		Material		Cast in ductile iron A395 heat treated. Tensile strength 60,000 psi; yield 40,000 psi; elongation 18%
		Dimensions		Vital dimensions ANSI B16.5 Class 150. Mates with ANSI B16.1, AWWA C207 2-D and 4-E flanges
		Finish		Red oxide primer or hot dipped galvanized

LJ-DI - ANSI Lap Joint Flange Dimensions, and Operating Pressure

Pipe Dia.	Product Code	HDPE Oper- ating Pres- sure	Out- side Dia O.D.	Inside Dia. I.D.	Hub at Base X	Lngth thru Hub Y	Thick- ness Q	Bolt Circle BC	Bolt Hole Dia d	No. of Holes n	Radius at Bore R	ANSI B16.5 Weight lbs
.5"	LJ-DI-0050	275	3.50	.90	1.19	0.63	0.44	2.38	0.63	4	0.13	1.1
.75"	LJ-DI-0075	275	3.88	1.11	1.50	0.63	0.50	2.75	0.63	4	0.13	1.5
1"	LJ-DI-0100	275	4.25	1.38	1.94	0.69	0.56	3.12	0.63	4	0.13	1.9
1.5"	LJ-DI-0150	275	5.00	1.97	2.56	0.88	0.69	3.88	0.63	4	0.25	3.1
2"	LJ-DI-0200	275	6.00	2.46	3.06	1.00	0.75	4.75	0.75	4	0.31	4.5
3"	LJ-DI-0300	275	7.50	3.60	4.25	1.19	0.94	6.00	0.75	4	0.38	8.2
4"	LJ-DI-0400	275	9.00	4.60	5.31	1.31	0.94	7.50	0.75	8	0.44	11.2
6"	LJ-DI-0600	275	11.00	6.75	7.56	1.56	1.00	9.50	0.88	8	0.50	15.5
8"	LJ-DI-0800	275	13.50	8.75	9.69	1.75	1.12	11.75	0.88	8	0.50	25.4
10"	LJ-DI-1000	275	16.00	10.92	12.00	1.94	1.19	14.25	1.00	12	0.50	38.2
12"	LJ-DI-1200	275	19.00	12.92	14.38	2.19	1.25	17.00	1.00	12	0.50	58.7

Please contact IPP for the distributor closest to you.
Discounts Available on Request.

BACK TO CATALOG

1900 POWELL ST, SUITE 220, EMERYVILLE, CA 94608
PHONE: (510) 923-1949 SALES FAX: (510) 923-1673 TOLL FREE: 1-800 969-0962
Email: info@ipp-inc.com Website: www.ipp-inc.com