IPP Systems Weld-on Field Flare System
redlineback.jpg (2460 bytes)

 woffsfred.jpg (12906 bytes)
Plastic Lined Pipe System
woffsx1blue.jpg (9812 bytes) woffsx1red.jpg (10399 bytes)
redball.jpg (3378 bytes) Description   A socket stub-end and a rotating back up flange system for fabricating plastic lined steel pipe.
Available in either a threaded socket stub-end or a slip-on socket stub-end for welded construction
redball.jpg (3378 bytes) Utilization Eliminates expensive flaring equipment. Rotating back up flange allows easy bolt hole alignment in fit up
redball.jpg (3378 bytes) Dimensions Standard flanges are 150# ANSI B16.5 bolt circles, mates with ANSI, AWWA. 300# class flanges available
redball.jpg (3378 bytes) Material ASTM A105 for stub-end; A395 and A105 for flanges.
Stainless steel sockets and flanges are available

 

slide1s.jpg (9050 bytes) weldon1s.jpg (10584 bytes) fitup1s.jpg (11023 bytes)
Slide on Flange Weld on Stub-end Fit up

Just cut and prepare pipe and plastic liner. Slip flange over the pipe end. Thread or weld the stub-end on the pipe. Install the plastic liner and flare. Bolt the system up. You're finished.

logowhitesmall1.jpg (7700 bytes)
1900 POWELL ST, SUITE 220, EMERYVILLE, CA 94608
PHONE: (510) 923-1949   SALES FAX: (510) 923-1673 TOLL FREE: 1-800 969-0962
Email: info@ipp-inc.com Website: www.ipp-inc.com

 

IPP Systems Weld-on Field Flare System
redlineback.jpg (2460 bytes)

Slip-On Socket Stub-end Pricing, Dimensions,  and Operating Pressure
Pipe Size IPP Product Code A D C B H T L R1 R2 ASTM A105 Slip-on lbs   Operating Pressure
1" SOC SE 0100 2.00 1.09 1.73 1.36 1.06 0.18 0.25 0.06 0.25 0.3 275
1.5" SOC SE 0150 2.88 1.66 2.35 1.95 1.19 0.20 0.25 0.09 0.25 0.6 275
2" SOC SE 0200 3.63 2.13 2.88 2.44 1.31 0.23 0.25 0.13 0.25 1.0 275
3" SOC SE 0300 5.00 3.14 4.17 3.57 1.50 0.30 0.25 0.13 0.25 2.2 275
4" SOC SE 0400 6.19 4.10 5.30 4.57 1.62 0.34 0.25 0.13 0.25 3.6 275
6" SOC SE 0600 8.50 6.16 7.52 6.72 1.99 0.43 0.25 0.13 0.25 6.9 275
8" SOC SE 0800 10.63 8.08 9.62 8.72 2.25 0.50 0.25 0.20 0.25 11.0 275
10" SOC SE 1000 12.75 10.14 11.79 10.88 1.94 0.50 0.38 0.25 0.38 12.8 275
12" SOC SE 1200 15.00 12.25 13.79 12.88 2.19 0.50 0.38 0.25 0.38 16.7 275
Please contact IPP for the authorized distributor closest to you.
Discounts Available on Request.

 

Back Up Flange Pricing, Dimensions,  and Operating Pressure: Modified Bore and Hub
Pipe Size IPP Product Code O.D. I.D. O R B.C. d n ASTM A395 Modified lbs ASTM A105 Modified  lbs Operating Pressure
1" LJ-DI-0100 MB 4.25 1.79 0.56 0.06 3.12 .63 4 1.4 1.9 275
1.5" LJ-DI-0150 MB 5.00 2.43 0.69 0.09 3.88 .63 4 2.4 2.9 275
2" LJ-DI-0200 MB 6.00 2.95 0.75 0.13 4.75 .75 4 3.7 4.7 275
3" LJ-DI-0300 MB 7.50 4.24 0.94 0.13 6.00 .75 4 6.8 7.2 275
4" LJ-DI-0400 MB 9.00 5.39 0.94 0.13 7.50 .75 8 9.1 9.9 275
6" LJ-DI-0600 MB 11.00 7.61 1.00 0.13 9.50 .88 8 11.6 13.3 275
8" LJ-DI-0800 MB 13.50 9.69 1.12 0.15 11.75 .88 8 18.7 20.3 275
10" LJ-DI-1000 MB 16.00 11.92 1.19 0.18 14.25 1.00 12 25.9 27.2 275
12" LJ-DI-1200 MB 19.00 13.92 1.25 0.18 17.00 1.00 12 41.7 43.5 275
ANSI B16.5 style available in ASTM A395
ductile iron and ASTM A105 forged steel		 Please contact IPP for the authorized distributor closest to you.
Discounts Available on Request.

BACK TO CATALOG

logowhitesmall1.jpg (7700 bytes)
1900 POWELL ST, SUITE 220, EMERYVILLE, CA 94608
PHONE: (510) 923-1949   SALES FAX: (510) 923-1673 TOLL FREE: 1-800 969-0962
Email: info@ipp-inc.com Website: www.ipp-inc.com